Modeling Software and High-Rise Shaping
This article is currently only available in PDF format, please click the link to the top right.
This article is currently only available in PDF format, please click the link to the top right.
Dr. Karel Vollers is assistant professor of Product Development at Delft University of Technology, Berlageweg 1, 2628CR Delft, The Netherlands. He post-graduated in 2001 cum laude at Delft University on the thesis Twist & Build, which was then published as a book. He specializes on realizing freely curved facades, and developed an adjustable mould for bending freely curved glass and, with Alcoa/Kawneer, an aluminum framing system. He may be contacted at K.J.Vollers@tudelft.nl.